ICOM IC-FR3000 Instruction Manual: Declaration Of Conformity

Vhf/uhf fm repeater.
Hide thumbs

DECLARATION OF CONFORMITY

For U.S.A.
This equipment complies with the Federal Communi-
cations Commission (FCC) rules and regulations gov-
erning telephone equipment and the Technical
Requirements for Connection to the Telephone Net-
work published by the industry's Administrative Council
for Terminal Attachments (ACTA). On the right side of
this equipment is a label that
formation, a product identifier in the format
US:ICMOT03BIC-FR4000. If requested, this number
must be provided to the telephone company.
The applicable certification jack (connector) USOC-RJ-
11C is used for this equipment.
This device can only be connected to the Public
Switched Telephone Network (PSTN) using a tele-
phone cord and modular plug that is compliant with the
criteria adopted by the ACTA. This equipment is de-
signed for connection to the telephone network or
premises wiring using a compatible modular jack that
is also compliant.
The Ringer Equivalence Number (or REN) is used to
determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a tele-
phone line may result in the devices not ringing in
response to an incoming call. In most, but not all
areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be
connected to a line, as determined by the total RENs,
contact the local telephone company. The REN for this
product is printed on the product identifier label
CAUTION: If this equipment is deemed potentially
harmful to the telephone network, the telephone com-
pany will attempt to notify you in advance of discontin-
uing service. If advance notice is not practical, the
telephone company will notify you as soon as possi-
ble. If service is disconnected, you will be advised of
your right to file a complaint with the Federal Commu-
nications Commission (FCC) should you believe it nec-
essary.
The telephone company may make changes in its fa-
cilities, equipment, operations or procedures that could
affect the operation of this equipment. Should this
occur, advance notice you be provided in order for you
to make necessary modifications to maintain uninter-
rupted service.
contains, among other in-
Should you experience trouble with this equipment,
please contact: ICOM America, Technical Support at
425-454-7619 for
repair or warranty information. If the
equipment is causing harm to the telephone network,
the telephone company may request that you discon-
nect the equipment until the problem is resolved.
There are no user serviceable parts for a telephone cir-
cuit inside of this IC-FR3000 or IC-FR4000.
NOTICE: Connection to party line service is subject to
state tariffs. Contact the state public utility commission,
public service commission or corporation commission
for information.
If your home has specially wired alarm equipment con-
nected to the telephone line, ensure the installation of
this IC-FR3000 or IC-FR4000
alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone com-
pany or a qualified installer.
For CANADA
NOTICE: This equipment meets the applicable Indus-
try Canada Terminal Equipment Technical Specifica-
tions. This is confirmed by the registration number.
The abbreviation, IC, before the registration number
signifies that registration was performed based on a
Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for
this terminal equipment is 0.3. The
each terminal equipment provides an indication of the
maximum number of terminals allowed to be con-
nected to a telephone interface. The termination on an
interface may consist of any combination of devices
subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does
not exceed five.
does not disable your
REN assigned to
ii

Advertising

This manual also for:

Ic-fr4000

Comments to this Manuals

Symbols: 0
Latest comments: