System, Alarm, And Game Sounds; Beam Receive - IBM WorkPad c3 Handbook

System, alarm, and game sounds

Your companion uses a variety of sounds. The System, Alarm, and
Game Sound settings enable you to turn the sounds on or off, and to
adjust the volume level.
To set the system and alarm sounds:
1. Tap the System Sound pick list and select the sound level.
Note: When you turn off the System Sounds, you also turn off
the "chime" tones associated with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note: The Game Sound setting works only with games that are
programmed to respond to this setting. Older games
typically do not respond to this setting.

Beam Receive

You can choose to turn off the Beam Receive feature. This prohibits
anyone from beaming information to your companion. It also results
in a slight saving of battery power.
To change the Beam Receive setting:
Tap the Beam Receive pick list and select On or Off.
Chapter 7 Page 157