Table of Contents
Advertisement
3
Squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size
being loaded.
Note: Use the size indicators on the bottom of the tray to help position the guides.
4
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
5
Load the paper stack with the recommended print side faceup. Load the paper in either the long-edge or
short-edge orientation as shown below:
Notes:
•
Load sizes larger than A4 in the short-edge orientation.
•
Paper must be loaded in the short-edge orientation to create booklets if the optional booklet finisher is
installed.
Long-edge orientation
6
Make sure the paper guides are secure against the edges of the paper.
Short-edge orientation
26
Advertisement
Table of Contents
