Table of Contents
Advertisement
Replacing the slide-rail assemblies
Complete the following steps to replace the outer and inner slide-rail assemblies
for the monitor and keyboard tray:
1. Turn off the monitor; then, disconnect power from the monitor.
2. Disconnect the keyboard, video, and mouse connectors from the server or
console switch.
3. If you installed a console switch in the rear of the rack cabinet, remove the
console switch from the rack.
4. Remove the screw that attaches the cable-management arm to the outer
slide-rail bracket.
5. Fully extend the monitor and keyboard tray from the front of the rack cabinet;
then, push in the release latch on each side of the tray and slide the monitor
Chapter 3. Hardware maintenance information
21
Advertisement
Table of Contents
