Table of Contents
Advertisement
13. Extend the inner part of the outer rails; then, slide the ball-bearing assemblies
forward to the front of the outer rails. Carefully slide the flat-panel monitor
and keyboard tray into the ball-bearing assemblies in the rails.
14. Press the release latches; then, push the flat-panel monitor and keyboard tray
completely into the rack. There will be resistance initially as the ball-bearing
assemblies align between the inner and outer rails. Pull the tray out halfway;
then, push it back in to seat the tray in the rails. Do this a few times until the
tray moves smoothly in the rails.
Release latch
15. Push the tray in the rack; then, tighten the four rear slide-rail bracket screws.
Chapter 2. Installing the Flat Panel Monitor Console Kit
11
Advertisement
Table of Contents
