Table of Contents
Advertisement
8. Loosen the two rail-adjustment screws on each of the outer slide rails; then,
extend the rails to their maximum outward adjustment.
Rail-adjustment
screws
9. Adjust the outer slide-rail brackets to fit the depth of the rack cabinet; then,
attach the front of the slide-rail brackets to the rack cabinet using four screws
from the miscellaneous hardware kit. Make sure that the slide-rail brackets
extend outside of the rack-cabinet mounting flanges.
Note: Do not install screws in the slide-rail bracket middle holes. These holes
are for the thumbscrews on the front of the tray.
Chapter 2. Installing the Flat Panel Monitor Console Kit
9
Advertisement
Table of Contents
