5
Touch Options.
6
From the Darkness area, touch
the fax.
7
Touch Fax It.
Sending a fax at a scheduled time
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
On the home screen, touch Fax.
4
Enter the fax number using the numbers on the touch screen or keypad.
5
Touch Options.
6
Touch Advanced Options.
7
Touch Delayed Send.
Note: If Fax Mode is set to Fax Server, the Delayed Send button will not appear. Faxes waiting for transmission
are listed in the Fax Queue.
8
Touch
to reduce the time or
The time is increased or decreased in increments of 30 minutes. If the current time is shown, the left arrow is
grayed out.
9
Touch Done.
10
Touch Fax it.
Note: The document will scanned and then faxed at the scheduled time.
Viewing a fax log
1
Open a Web browser.
2
In the address bar, type the IP address of the printer, and then press Enter.
3
Click Reports.
4
Click Fax Settings.
5
Click Fax Job Log or Fax Call Log.
Canceling an outgoing fax
Canceling a fax while the original documents are still scanning
•
When using the ADF, touch Cancel while Scanning... appears.
•
When using the scanner glass (flatbed), touch Cancel while Scanning... appears or while Scan the Next
Page / Finish the Job appears.
to reduce the darkness of the fax, or touch
to increase the time the fax will be transmitted.
88
to increase the darkness of