teel 4RJ40 Operating Instructions & Parts Manual

Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Teel Professional Self- ®
Priming Centrifugal Pump
Description
Teel self-priming to 20 ft., corrosion-resistant centrifugal pumps Model Numbers
4RJ40, 4RJ41, 4RJ42, 4RJ43, and 4RJ44, are for use in commercial irrigation, water
transfer, draining, and general de-watering applications. Specially fitted to be
resistant to brine or salt water. Pumps from ponds, cisterns, or well points.
Maximum suction lift is 20 to 25 ft. (See Table below). Discharge can be divided to
supply 2 or more systems. 3/4, 1, 1
115/230 volt operation. 2 HP and 2
range from 10 to 50 psi, flow rates from 7 to 92 GPM.
For use with non-flammable liquids compatible with pump component materials.
Figure 1
Dimensions
Port Size
Model Inlet Outlet
4RJ40 2"
4RJ41 1 1 ⁄
2
4RJ42 1 ⁄
1
2
4RJ43 2
4RJ44 1 ⁄
1
2
Specifications
Model
4RJ40 Fiberglass Reinforced Thermoplastic
4RJ41 Fiberglass Reinforced Thermoplastic
4RJ42 Fiberglass Reinforced Thermoplastic
4RJ43 Fiberglass Reinforced Thermoplastic
4RJ44 Fiberglass Reinforced Thermoplastic
(†) Seal has ceramic seat, carbon head, and stainless steel spring.
Form 5S4195
1 ⁄ HP models have dual voltage motors for
2
⁄ HP models are 230 volt. Discharge pressures
1
2
Unpacking and Inspection
Handle with care. Check items received
against packing list to be sure that all
equipment has been received. Inspect
for shipping damage. If found, file
claim with carrier immediately.
General Safety Information
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol.
3691 0400
When you see this symbol on your
Volts @
60 Hz. HP
2" 230 2 1 /
2
1 1 ⁄ 115/230 1
2
1 ⁄ 115/230 1 /
1 1
2 2
2 230 2
1 ⁄ 115/230 3/4
1
2
Pump Body
Printed in U.S.A.
09319
0600/225/E3
4RJ40, 4RJ41, 4RJ42, 4RJ43 and 4RJ44
Motor Maximum
Phase Suction
1 25 ft.
1 20
1 20
1 25
1 20
Impeller
Engineered Polymer
Engineered Polymer
Engineered Polymer
Engineered Polymer
Engineered Polymer
pump or in this manual, look for one of
the following signal words and be alert
to the potential for personal injury.
Warns about
hazards
that will cause serious personal injury,
death, or major property damage if
ignored.
Warns about
hazards that can
cause serious personal injury, death, or
major property damage if ignored.
Warns about
hazards that will
or can cause minor personal injury or
property damage if ignored.
NOTE: Indicates special instructions
which are important but not related to
hazards.
Carefully read and follow all safety
instructions in this manual and on
pump.
Dimensions
Height Width Length
12 3 ⁄ " 6 9 ⁄ " 21"
8 1 6
11 13 ⁄ 6 9 ⁄ 18
1 6 1 6
11 ⁄ 6 ⁄ 19
13 9
1 6 1 6
12 3 ⁄ 6 9 ⁄ 21
8 1 6
11 ⁄ 6 ⁄ 18
13 9
1 6 1 6
Seal
Viton† Polypropylene
Viton† Polypropylene
Viton† Polypropylene
Viton† Polypropylene
Viton† Polypropylene
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
Wt
64 lbs.
F
5 ⁄ 46
8
R
⁄ 50
3
4
A
59
N
⁄ 44
5
8
Ç
A
I
Diffuser
S
®