Cooktop Use; Control Knobs; Cooking Utensils; Burners - Fisher & Paykel DCS CDU Series Installation Instructions And User Manual

COOKTOP USE

16
US
CA

CONTROL KNOBS:

The burners have an infinite number of heat settings and there are no fixed positions on the control knobs be-
tween HI and SIM (with the exception of LO). To light a burner, push its control knob in and rotate counterclock-
wise to HI. You will start hearing the igniters click and the burner should light immediately. To use, turn the knob
to the desired setting. When you have finished using the burner, make sure you turn its control knob clockwise
back to OFF.

COOKING UTENSILS:

For best results we recommend using professional cookware. If using regular cookware, be very careful if the pans
have plastic handles, as these large professional size burners can flame up on the outside of the pan and melt or
bubble the handles.

BURNERS:

The cooktop has burners with different maximum outputs. All burners have exceptionally low simmer capabilities
(see the tables below). All the burners have electronic spark re-ignition to eliminate continuously burning pilot; if
the flame is blown out, it will automatically relight.
Burner
MAX. Btu/hr
Location
NAT
1, 2, 4, 5 11,000 10,000
3 17,500 15,000
4
5
CDU-365
LOW Btu/ SIMMER
hr Btu/hr
LP NAT & LP NAT & LP
3,000 1,200
3,000 1,200
2
3
1
THESE GRAPHICS
SHOW BURNER
LOCATION:
REAR LEFT BURNER
CDU-304
Burner
MAX. Btu/hr
Location
NAT
1 10,000
2, 3 11,000
4 15,500
3
4
TOP VIEW OF KNOB
LOW Btu/ SIMMER
hr Btu/hr
LP NAT & LP NAT & LP
10,000 3,000 1,200
10,000 3,000 1,200
15,500 3,000 1,200
2
1