Related Manuals for Fisher & Paykel CE302C
Summary of Contents for Fisher & Paykel CE302C
-
Page 1: Installation Instructions
Installation instructions User guide Ceramic glass cooktops CE302C, CE604L, CE604C and CE905C models NZ AU GB IE... -
Page 3: Table Of Contents
Contents Safety and warnings Installation instructions Introduction Using your cooktop Cooking guidelines Care and cleaning Troubleshooting Warranty and service Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed on the back cover or contact your local Fisher &... -
Page 4: Safety And Warnings
Safety and warnings Your safety is important to us. Please read this information before using your cooktop. Installation WARNING! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. -
Page 5: Important Safety Instructions
Safety and warnings Important safety instructions Read these instructions carefully before installing or using this appliance. No combustible material or products should be placed on this appliance at any time. Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs. - Page 6 Safety and warnings Operation and maintenance WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. Switch the cooktop off at the wall before cleaning or maintenance.
- Page 7 Safety and warnings Important safety instructions Never use your appliance as a work or storage surface. Never leave any objects or utensils other than suitable cookware on the appliance. Do not allow children to play with the appliance or sit, stand or climb on it. Do not store items of interest to children in cabinets above the appliance.
-
Page 8: Installation Instructions
Installation instructions Cooktop and cutout dimensions Drawings for illustration purposes only Terminal block location: CE604L, CE604C & CE905C models - Middle rear CE302C models - Front left Cooktop and cutout dimensions (mm) overall width of cooktop overall depth of cooktop... - Page 9 Installation instructions Clearances Drawings for illustration purposes only Clearances (mm) minimum clearance from rear edge of cutout to: nearest combustible surface minimum clearance from glass surface to: rangehood minimum clearance from side edges of cutout nearest combustible surface minimum clearance from benchtop to: overhead cabinet not directly above the cooktop minimum clearance below top of benchtop to:...
- Page 10 Installation instructions Before you install the cooktop, make sure that the benchtop is square and level, and no structural members interfere with space requirements the benchtop is made of a heat-resistant material the cooktop will not be installed directly above a dishwasher, as the humidity may damage the cooktop the installation will comply with all clearance requirements and applicable standards and regulations...
- Page 11 Installation instructions Fastening the cooktop to the bench Turn the cooktop upside down and place it on a soft surface. Spread the seal around the edges of the ceramic glass with the adhesive side facing down, making sure that the whole perimeter is sealed. Cut off any excess material. Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening the screws).
- Page 12 The power supply cable must not touch any hot parts and must be positioned so that its temperature will not exceed 75 C at any point. Power supply CE302C 2900W @ 220-240V~ (12.6 A) CE604L 6000W @ 220-240/380-415V 3N~ (26 A) CE604C 6400W @ 220-240/380-415V 3N~ (27.8 A) CE905C 8400W @ 220-240/380-415V 3N~ (36.5 A) Important! Check with an electrician whether the domestic wiring system is suitable without alterations.
- Page 13 Installation instructions Final checklist TO BE COMPLETED BY THE INSTALLER Is the cooktop earthed? Check that the power supply cable is NOT touching the base of the cooktop. This will ensure that the cable is not damaged by heat from the cooktop. Check that the power supply cable is not accessible via cupboard doors or drawers.
-
Page 14: Introduction
Before using your new cooktop Read this user guide, taking special note of the ‘Safety and warnings’ section. Remove any protective film that may still be on your cooktop. Fig.4 CE302C model Fig.5 CE905C model Fig.6 CE604L model Fig.7 CE604C model... -
Page 15: Using Your Cooktop
Using your cooktop To start cooking High Turn the control dial of the cooking zone you wish to use to the High setting, then adjust as necessary. When using dual cooking zones, you may choose to use the inner zone only ( ) or the full dual cooking zone ( ). -
Page 16: Cooking Guidelines
Cooking guidelines Cookware Use heavy-gauge, flat, smooth-based cookware that matches the diameter of the cooking zone. This will provide good contact with the glass and help reduce cooking times. Low heat or slow cooking is often due to incorrect cookware size. Cookware with a stainless steel sandwich base or enamelled cast iron will give you the best results. - Page 17 Cooking guidelines Important! Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Take care when deep-frying: oil or fat can overheat very quickly, particularly on a high setting. General cooking tips Using a lid will reduce cooking times through retaining the heat. Minimise the amount of liquid or fat to reduce cooking times.
-
Page 18: Care And Cleaning
Care and cleaning Important! For your safety, switch the power to the cooktop off at the wall before any cleaning. In this case, there will be no ‘Hot surface’ indication, but the cooking zones may still be hot! Take extreme care. - Page 19 Care and cleaning What? How? Important! soiling examples Hot sugary spills, Remove these immediately with a Remove stains left by melts melted plastic or spatula or razor blade scraper suitable and sugary food or spillovers metal on glass for ceramic glass cooktops, but beware immediately.
-
Page 20: Troubleshooting
Troubleshooting Troubleshooting chart Problem Possible causes What to do Cooking zones cannot be No power. Make sure the cooktop is turned on. connected to the power supply and that it is switched on at the wall. Check whether there is a power outage in your home or area. -
Page 21: Warranty And Service
Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: your product is correctly installed you are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service &... - Page 22 Warranty and service This cooktop has been designed and constructed in accordance with the following codes and specifications: In New Zealand and Australia: AS/NZS 60335-1 General Requirements for Domestic electrical appliances AS/NZS 60335-2-6 Particular Requirements for Domestic electrical cooking appliances AS/NZS 1044 Electromagnetic Compatibility Requirements.
- Page 24 Copyright © Fisher & Paykel 2009. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.