Advertisement
SAFETY
WARNING
Welding and cutting is dangerous to the operator people in or near the working
and surrounding areas, if the equipment is not operated correctly. Therefore the
performance of welding/cutting must only be under the strict and
comprehensive observance of all relevant safety regulations.
Symbol
02
Electric Shock: Maybe fetal
• Avoid all contact with live components of the welding circuit,
Electrodes and Wires with bare bands. Wear dry gloves before
start welding task.
• Wires with bare bands Keep operator insurance from welding
metal and welding pieces.
Smoke and gas generated while welding or cutting Harmful to
health of people
• keep head distance away from gas.
• Avoid breathing the smoke and gas of welding or cutting.
• keep the working area in good ventilation.
Fire Hazard
• weting sparks, Power cable leakage both can cause the fire.
• Please do not welding in inflammable, its can cause explode.
• Sparks may cause fire, Remove flammable material from the
work place.
• Keep fire extinguisher nearby and have a trained fire person
ready to use it.
ARC light-emission: Harmful to the eyes & skin of people
• Wear a welding helmet, Anti-radiation glass and work clothes
while the welding Operation is performed.
• Keep working area in ventilation.
CYLINDER may explode if damaged.
• Always keep cylinders in an upright position securely chained to
an Undercarriage or fixed support.
• Never allow the electrode, electrode holder or any other
electrically `hot" parts to touch a cylinder
• Keep your face and head away from the cylinder valve outlet
when it to be opening.
Engine fan can hurt the hands
• Do not put your hands near the engine fan.
• Do not attempt to override the governor or idler by pushing on
the throttle Control rods while the engine is running.
ELECTRIC SHOCK can kill.
• Insulate yourself from work and ground using dry insulation.
Make certain the insulation is large enough to cover your full
area of physical.
• Ground the work or metal to be welded to a good electrical
ground.
• Never dip the electrode in water for cooling.
• Turn off input power using the disconnect switch at the fuse box
before working on the equipment.
• Install equipment in accordance with electric standard code.
Descripiton
PLASMA CUTTER
OPERATION MANUAL
Advertisement
