Fisher & Paykel DISHDRAWER DD60SCX9 User Manual page 44

Hide thumbs Also See for DISHDRAWER DD60SCX9:
Table of Contents

Advertisement

PROBLEM
Foaming
Water leaking
Dishwasher
does not
recognize
when I knock
on the door
to pause or
unlock it
(DD*I models
only)
Dishwasher
is registering
taps and
bumps as
knocks and
pausing
inadvertently
(DD*I models
only)
40
TROUBLESHOOTING
POSSIBLE CAUSE
Wrong type of detergent
used
Incorrect amount of
detergent.
Too much egg left on
plates.
Rinse aid setting too
high.
Rinse aid dispenser plug
not closed properly.
Drain hose disconnected
from waste pipe.
Water inlet hose not
properly connected.
Other leaks.
Rinse aid dispenser plug
not closed properly.
Not knocking hard
enough.
Door knock sensor is
incorrectly installed or
calibrated.
Door knock sensor is
incorrectly installed or
calibrated.
WHAT TO DO
ONLY use dishwasher detergent.
See 'Adding detergent'.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Rinse off excess egg prior to loading.
Increase the amount of detergent.
Decrease the rinse aid setting.
Ensure that the rinse aid dispenser plug
is fully closed, with its hand grip pointing
vertically. See section 'Using rinse aid'.
Reconnect the drain hose to the waste
pipe.
Ensure the inlet hose is connected
securely.
Turn water and power supplies to the
dishwasher off. Call Customer Care or
your Authorised Service Centre. See your
'Service and warranty' booklet for contact
details.
Ensure that the rinse aid dispenser plug
is fully closed, with its hand grip pointing
vertically. See section 'Using rinse aid'.
Ensure you are knocking firmly on the
door, rather than using a light tap.
Contact Customer Care.
Contact Customer Care.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents