Table of Contents
Advertisement
300W multifunctional tool
Safety instructions for sanding paint
–
Do not sand paints that contain lead. Determine whether the paint you intend
to sand contains lead before beginning work. Dust from paints containing lead
may cause lead poisoning.
–
A special test or a commercial painting contractor can determine whether a paint
contains lead. If in doubt, you should wear a special dust mask to protect you
from fine particles containing lead. Ask a qualified professional about this.
–
Sanding coats of paint containing lead, various types of wood and metals could
produce hazardous or poisonous dust. Coming into contact or inhaling the dust
may pose a risk to the operator or nearby persons. Wear suitable protective
equipment to protect yourself and nearby persons from coming into contact or
inhaling this dust. Normal dust masks do not provide proper protection.
–
Do not allow children or pregnant persons to enter the room or work area where
you are sanding.
–
Do not eat, drink or smoke while working. Clean your hands before you eat,
drink or smoke. Do not leave any food or beverages exposed as there is a risk of
dust accumulating in them.
–
After sanding, thoroughly clean the surfaces of the work area.
Safety instructions for dust extraction
Dust from materials whose constituents include paint coats containing lead, some
types of wood, minerals and metal could be harmful to health. Coming into contact
or inhaling such dust could cause allergic reactions and/or respiratory illness on
the part of the user or persons in the immediate vicinity. Certain dusts such as oak
or beech dust are considered carcinogenic, particularly in combination with wood
treatment additives (chromate, wood preservatives).
–
Use a dust extractor.
–
Use a special extractor to extract types of dust, which are particularly harmful to
health, carcinogenic or dry.
–
Make sure the work area is adequately ventilated.
–
Wear a P2 dust mask (filter class) when performing work that produces dust.
If the multifunctional tool has a port for dust extractors and/or dust collectors,
connect the dust extractor to it.
–
Observe the regulations in your country that apply to the materials you intend to
work on.
AFTER SALES SUPPORT
GB
+44 (0) 1904 727501
IRE
+353 (0) 19022605
GB
IRE
Safety
12
www.coreservice.co.uk
Advertisement
Table of Contents
