Operating Instructions; Mounting To A Bench; Switching On And Off; Sharpening Hss Drill Bits - ALDI FERREX 705715 User Manual

65 W Multifunctional sharpener

Operating instructions

NOTE: Before using the sharpener, read the instruction manual carefully.

Mounting to a bench

NOTE: There are four bench mountable holes (15)
on the base of the sharpener. Use four screws (not
provided) to fix it onto a stable position before use.

Switching on and off

1. Insert the plug into the mains power socket and
switch on the power.
2. To turn the sharpener on, move the on/off switch
(10) to the "I" position.
3. To turn the sharpener off, move the on/off switch
(10) to the "O" position (See Fig. A).

Sharpening HSS drill bits

WARNING: Before assembling the HSS drill
sharpener module (2) , be sure the sharpener
is unplugged and the on/off switch (10) is in
the Off "O'' position.
1) Slide the HSS drill sharpener module onto the side of the sharpener with
the grinding wheel (1). Make sure the HSS drill sharpener module is locked
in place (See Fig. B1, B2).
B2.
AFTER SALES SUPPORT
1300 889 028
(toll free)
B3.
13 mm
3 mm
A.
B1.
B4.
e-mail: info.aldi@positecgroup.com
MODEL No.: BDS651 • 05/2021 • 705715
10