GB
IRE
Safety
Operational safety instructions for your multifunctional
tool
–
Hold the multifunctional tool by the insulated handles when performing work
where there is a risk of the fitted tool being used coming into contact with
hidden power lines. Contact with a live line could also energise metallic parts of
the device and inflict an electric shock.
–
Always wear protective goggles and a dust mask when sanding; especially
when sanding overhead.
–
Wear ear protection.
–
Wear protective gloves when changing the fitted tools. Fitted tools become hot
after prolonged use.
–
Use the multifunctional tool only for dry sanding.
–
Only use sand paper of the length that you need. Any paper protruding from the
sanding plate can cause serious injury.
–
Never expose the multifunctional tool to high temperatures (heaters etc.) or to
the effects of the weather (rain etc.).
–
Keep your hands away from the work area. Do not reach under the work piece.
There is a risk of injury resulting from contact with the saw blade or scraper.
–
Grip the multifunctional tool with two hands and maintain a stable posture to
avoid the risk of serious injury. When working with the multifunctional tool,
always hold it firmly with both hands and provide for a secure stance.
–
Only scrape materials that have not been moistened (e.g. wallpaper) and do not
scrape on a wet base.
–
Adopt a stance that prevents injury in the event of slipping off the work piece.
–
Only use fitted tools that are in proper technical condition.
–
Fitted tools may become extremely hot. After making a cut, do not touch the
fitted tool and make sure that the multifunctional tool is kept in a safe place once
you have finished work.
–
When working on masonry or ceilings, take note of the location of electric pipes
as well as water and sewage pipes.
–
Never place the multifunctional tool or the accessories on or near hot surfaces
(e.g. radiators).
11
www.coreservice.co.uk
300W multifunctional tool
AFTER SALES SUPPORT
GB
+44 (0) 1904 727501
IRE
+353 (0) 19022605