Table of Contents
Advertisement
GB
IRE
Safety
•
Operation or maintenance of the multifunctional tool by persons not familiar
with how to handle the multifunctional tool and/or who are not aware of the
related risks.
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out. The
following risks may arise due to the nature of the multifunctional tool:
•
Projection of parts or breakage of the sanding surface, the fitted tool or the
material being processed pose a risk of severe injury or blindness if the
prescribed protective goggles are not worn,
•
Contact with sharp or hot parts of the work piece or the fitted tool during
operation or while performing maintenance,
•
Damage to hearing if the prescribed hearing protection is not worn,
•
Inhalation of particles produced whilst sanding the material as well as the
surface being sanded or polished.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
multifunctional tool or on the packaging.
WARNING!
CAUTION!
NOTICE!
Declaration of conformity (see chapter "Declaration of conformity"):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
A product placed on the United Kingdom market meets the UKCA Marking
requirements
7
www.coreservice.co.uk
This signal symbol/word designates a hazard
with moderate risk, which may result in death or
severe injury if not avoided.
This signal symbol/word designates a hazard
with low risk that, if not avoided, may result in
minor or moderate injury.
This signal word warns against potential
damages to property.
300W multifunctional tool
AFTER SALES SUPPORT
GB
+44 (0) 1904 727501
IRE
+353 (0) 19022605
Advertisement
Table of Contents
