SiAECOSYS VOTOL EM Program Manual page 22

SiAECOSYS
6. Port setting interface
Stir up one gear
S gear
Temperature control
port cannot be changed
6.1: the above port functions are factory default configuration,
corresponding to Lande 2×8 transfer line drawing,
em30s EM50 (EM100 without anti-theft) -EM150s is general.
Click/shift three gears
Theft
prevention
First line
communication
Single
support
High brake
reverse
P gear
22
V2
1. Arrange and insert each port
corresponding to the main
function of the controller
2. When changing the function,
select the number sort table
under each port to change, and
the Numbers correspond to
different functions.
3. Click the function to check
the SW option.Dialing is not
optional.For example, point to
move three gear, point to
move P gear
4. To move the P file, you need
to check LA
5.After the function
changed, the function can take
effect according to the Settings
page options. (if the port is set
to change to three levels, and
the page is set to change to
three levels, the function will
be invalid.)
Port function configuration.xlsx
is