SiAECOSYS VOTOL EM Program Manual page 20

SiAECOSYS
"d", indicating that the download is successful. Serial port line is divided into the following models: em-30 ~
em-150 general, em-200, em-300, can
4.2: import configuration
4.2.1: select the INI file, open the file, import the controller parameters, and receive the prompt "import
succeeded"
4.3: change configuration
4.3.1: connecting the controller
4.3.2: change parameters to be modified
4.3.3: controller parameter writing
Be careful:
USB isolation cable is used. It is not a special isolation line that burns ECU serial port line and computer.
ECU is not read completely. Click more than once in setting meeting 1 to connect ECU.
5. The setting page Display
Analog vehicle instrument display
1.Speed: display the actual speed of the
motor
2.Voltage: display the actual output
voltage of power supply and battery
3.Current: display the actual output
current of power supply and battery
4. Fault display: display vehicle fault
5.Gear display: display the current gear of
the vehicle
6.Function display: display the current
functions of the vehicle
7.Controller temperature: display
controller chip temperature
8.External temperature: display motor
temperature
9.Temperature coefficient value: display
controller hardware coefficient
20
V2