Fisher & Paykel WH1060P Installation Manual/User Manual page 56

PROBLEM
Vibrating
Creasing
56
TROUBLESHOOTING
POSSIBLE CAUSES
Transit bolts left in place.
Washer may not be level.
Load is out of balance.
Washer overloaded.
Incorrect cycle for load type.
Spin speed too fast.
Wet clothes left in washer or
laundry basket.
Wash temperature too hot for
load type.
Items not sorted correctly.
WHAT TO DO
Ensure transit bolts are removed prior
to use of the washer. Refer to 'Removing the
transit bolts'.
Ensure washer is installed on an appropriate
surface and levelled correctly. Refer to
'Levelling the washer'.
Wash an average sized load rather than
a smaller load or a single item. Washing one
item at a time is not recommended as it is
difficult for the washer to balance a single
item during spin.
Do not overload the washer.
Use the ,
EASY IRON DELICATE
cycle for creasable items.
STEAM REFRESH
Select a slower spin speed.
Laundry left sitting wet is more likely to
crease. If not removing clothes from washer
immediately at end of cycle, select the
option. Do not leave wet
WRINKLE FREE
washing sitting in a washing basket.
Select a lower wash temperature.
Check items care label for correct care.
Check the hot and cold taps are connected
to the correct valves. Refer to 'Water supply'.
Sort load so that items of similar weight are
washed together.
or