Replacing The Fuse; Replacing The Headlight Bulb - Yamaha XT250N 2000 Owner's Manual

1. Fuse
2. Spare fuse

Replacing the fuse

The fuse holder is located behind
panel B. (See page 6-6 for panel
removal and installation procedures.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn
off all electrical circuits.
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
Specified fuse: 15 A
PERIODIC MAINTENANCE AND MINOR REPAIR
cC
Do not use a fuse of a higher
amperage rating than recommend-
1
ed to avoid causing extensive
damage to the electrical system
2
and possibly a fire.
3. Turn the key to "ON" and turn on
the electrical circuits to check if
the devices operate.
EAU01307
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EC000103

Replacing the headlight bulb

This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
6-32
1. Remove cowling A. (See page
6-5 for cowling removal and
installation procedures.)
EAU01235
1
2
3
4
5
6
7
8
9