Decommissioning; Accidents, Failures; Risk Arising From The Use Of The Side Cutter - PROFIX 135 Instruction Manual

In case it is necessary to replace the drive belt, it is necessary to replace the old belt only with the 635
5M type belt manufactured by Optibelt. When replacing the drive belt, it is necessary to cover the
knives with the cover designed for this purpose, supplied with the device.
In case it is necessary to replace the cutter's clamp assembly bolt, it is necessary to replace it with
the M10 x 30 bolt with a class of 8.8. Each of the cutter's clamps must be assembled with two bolts.
According to the Directive no. 2002/96/EC of the European Parliament and Council of 27
January 2003 on waste of electrical and electronic equipment (WEEE), the Profi 135 rape
side cutter
user is obligated to return it to a company dealing with collection of decommissioned
electrical and electronic equipment.
In case of the device's failure, it is necessary to disconnect it from the power supply, shut
down the combine harvester and disassemble the cutter with preservation of the above safety
measures.
In case of locking the cutter's operation due to its penetration by undesirable elements or
residue of the harvested barley, it is necessary to disconnect the cutter from the power supply, shut
down the combine harvester, use the cover for the knives supplied with the device, disassemble the
cutter if necessary and remove the elements locking the device's operation with preservation of the
safety measures.
Despite the fact that we made all efforts in order for the use of the PROFI 135 rape side cutter
purchased by you to be safe for the health and life, it was impossible to eliminate all the risks.
Therefore, it is strictly necessary to comply with the principles specified in this instruction
manual and the basic safety principles. The risk arising from the use of the side cutter is related to:
The shape, size and sharpness of the knives, which remain uncovered during the
machine's operation and their replacement
Large weight of the cutter, which is related to the risk of injuries caused by its fall on any of
the user's body part
The exposure to the user's contact with the drive (hydraulic, electrical) during
the assembly/disassembly of the cutter
Other factors, which can be a cause of risk, when the side cutter is used without compliance
with its intended use or this instruction manual.
be placed with other household wastes after its decommissioning. The
14