EUPA AP0 User Manual page 60

Ø
KBC clock source
KBC clock source:
- 8MHz
- 12MHz
- 16MHz
Ø
Onboard FDC Controller
Onboard FDC
Controller:
- Enabled
- Disabled
Ø
Onboard UART Port 1/Port 2
Onboard UART Port
1/Port 2:
-3F8/IRQ4
-2E8/IRQ3
-3E8/IRQ4
-2F8/IRQ3
- Disabled
- Auto
Ø
UART 2 Mode
UART 2 Mode:
- IrDA
- Norma
- ASK IR
AP0 USER'S MANUAL
Set the frequency for the keyboard controller input
clock
Select Enabled if your system has a floppy disk
controller (FDC) installed on the system board and
you wish to use it. If you install and-in FDC or the
system has no floppy drive, select Disabled in this
field
Select an address and corresponding interrupt for
the first and second serial ports.
Select an operating mode for the second serial
port.
The choice: IrDA, Normal, ASK IR.
3-31