2-3.3 Buffered And Non-Buffered; 2-3.4 2-Clock And 4-Clock Signal; 2-3.5 Parity And Non-Parity - EUPA AP0 User Manual

II.HARDWARE INSTALLATION
This motherboard supports all the above memory speed. For better system
performance and reliability, we suggest that you use PC-100 SDRAM if
100MHz or above CPU Bus Clock is used in your system.

2-3.3 Buffered and Non-buffered

Only the non-buffered DIMM can be used in this mainboard.
The difference between buffered and non-buffered DIMM can be identified by
the notch position shown above.

2-3.4 2-clock and 4-clock signal

Both 2-clock and 4-clock SDRAM DIMM supported by this mainboard.

2-3.5 Parity and Non-parity

This mainboard supports standard 64 bit (Non-parity) and 72 bit (Parity)
DIMM modules.
AP0 USER'S MANUAL
2-15