EUPA AP0 User Manual page 5

2-2.13 Wake On LAN Connector...........................................
2-3 System Memory Installation ...................2-13
2-3.1 Type .............................................................................
2-3.2 Speed ...............................................................
2-3.3 Buffered and Non-buffered .......................................
2-3.4 2-clock and 4-clock Signal.......................................
2-3.5 Parity and Non-parity..............................................
2-3.6 Memory Auto detection by BIOS .............................
2-3.7 Suggested SDRAM combination ..............................
SECTION 3: CMOS SETUP UTILITY
3-1 BIOS Setup Main Menu..............................3-1
3-2 Standard CMOS Setup...............................3-2
3-3 BIOS Features Setup .................................3-5
3-4 Chipset Features Setup ...........................3-10
3-5 Power Management Setup.......................3-14
3-6 PNP/PCI Configuration Setup .................3-19
3-7 Load BIOS Defaults..................................3-22
3-8 Load Setup Defaults ................................3-23
3-9 W83783S Hardware Monitor...................3-24
3-10 Integrated Peripherals .............................3-26
3-11 Password Setting....................................3-32
3-12 IDE HDD Auto Detection.........................3-33
3-13 Save & Exit Setup..................................3-33
3-14 Exit without Saving................................3-33
2-12
2-13
2-13
2-14
2-14
2-14
2-15
2-15
V