2-2.10 Ide Hard Disk And Cd-Rom Connector - EUPA AP0 User Manual

II.HARDWARE INSTALLATION

2-2.10 IDE Hard Disk and CD-ROM Connector

Connect your IDE devices to the onboard 40-pin IDE connectors marked as
Primary and Secondary.
Secondary
Primary
It is suggested that you connect the IDE devices to your IDE cables as the
figure shown above. Each IDE channel, either Primary or Secondary, supports
two IDE devices which must be set differently to master mode and slave
mode.
(Refer to your hard disk and CD-ROM user' s manual for detailed settings of
IDE master and slave mode.)
2-10
AP0 USER'S MANUAL
Secondary
Primary
Secondary IDE Cable
Master
Slave
Primary IDE Cable
Master
Slave