promelectroavtomat XL2120 Service Manual page 6

Disassembly Procedure
21. Remove the one screw (giza tite 5 × 16) and remove the cord retainer and the thread winding retainer.
22. Remove the two screws (giza tite 5 × 16) to remove the bobbin assembly.
23. Remove the one screw (taptite, bind B M 4 × 10) to remove the shield wire clip.
24. Remove the two screws (giza tite 5 × 16) to remove the motor.
25. Remove the two screws (screws, pan (S/P washer) M 3 × 20) to remove the three pole lamp socket.
26. Remove the two screws (taptite, bind B M 4 × 10) to remove the Plate apring, the adjusting plate, and the
adjusting screw.
27. Remove the spool pin spring and remove the spool pin.
28. Remove the one screw (giza tite 5 × 16) to remove the lower thread guide assembly.
29. Remove the two screws (giza tite 4 × 14) to remove the bobbin retainer.
R
R
P
P
P
P
P
www.promelectroavtomat.ru
Q
S
Q
S
M
O
O
M
L
L
L
K
K
K
O
N
N
N
2 - 4