promelectroavtomat XL2120 Service Manual page 15

Assembly Procedure
23. Install the reverse stitching knob.
24. Tighten the screws for fastening the front cover, one in the front (giza tite 5 × 16) and six in the back (five
giza tite 5 × 16, and one giza tite 3 × 32), to secure the front cover.
25. Attach the selection dial on the front face of the front cover.
26. Fasten the face plate with the one screw for holding it.
27. Install the inner rotary hook and attach the needle plate B.
N
N
N
N
N
N
M
P
N
P
P
O
Q
www.promelectroavtomat.ru
2 - 13