Table of Contents
Advertisement
Adjustment
10.Forward/Reverse Adjustment of the Super Stitch Feeding
• The stitch length of both the forward and the reverse feeds should be the same.
1 Attach a J presser foot, lower the presser lever, and attach a cover.
2 Turn the selection dial to select the triple zigzag stitching.
3 Set a piece of paper and turn the pulley to check the needle down condition.
4 Loosen the screw (Screw, pan M3 × 8) within the selection dial. (Lower left screw)
5 Turn the screw with a screw driver to adjust feed amount of both the forward and reverse feeds.
6 Loosen the screw (Screw, pan M3 × 8) within the selection dial. (Lower left screw)
7 Set a piece of paper and turn the pulley to check the needle down condition.
www.promelectroavtomat.ru
3 - 10
Advertisement
Table of Contents
