The Cable; Figure 3-3: Combination Cable - Cisco WIRELESS-G WBP54G User Manual

2,4 ghz 802.11g wireless-g bridge for phone adapters

Hide thumbs Also See for WIRELESS-G WBP54G:

Table of Contents

Wireless-G Bridge for Phone Adapters

The Cable

The Bridge has a combination Ethernet network and power cable.

Network

For setup, you will use the Ethernet network cable to connect the Bridge to your network router or

PC running the Setup Wizard. After setup, you will use this cable to connect the Bridge to the Linksys

phone adapter or IP phone.

Power

After the Bridge has been configured, you will connect this cable to the Power port of the Linksys

phone adapter or IP phone. One power adapter will power the Bridge, as well as the phone adapter

or IP phone.

Chapter 3: Getting to Know the Wireless-G Bridge for Phone Adapters

The Cable

Table of Contents