Stopping Boat; Trolling; Adjusting Trolling Speed - Yamaha F75 Owner's Manual

Operation
To shift from in gear (forward/reverse) to neu-
tral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the remote control lever / gear shift
lever firmly and crisply into the neutral po-
sition.
56
EMU31742

Stopping boat

EWM01510
WARNING
Do not use the reverse function to slow
G
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the steering wheel or other parts of the
boat. This could increase the risk of se-
rious injury. It could also damage the
shift mechanism.
Do not shift into reverse while traveling
G
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU30880

Trolling

EMU30890

Adjusting trolling speed

The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.