Yamaha F75 Owner's Manual page 67

2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted up
completely.
UP
"
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down sud-
denly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
sure.
[EWM00262]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trail-
ered in the normal running position,
use an additional support device to
secure it in the tilt position. For more
detailed information, see page 64.
[ECM01641]
4. Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
Operation
ZMU04232
NOTICE: Do not use the
61