Table of Contents
Advertisement
Appendix D
Sample Installation Scripts
#
# All lines beginning with a '#' are comments and WILL NOT BE READ BY
# PROGRAMS.
# can be easily added and removed by removing/added a '#'.
#
# Copyright (c) 1997-2008 by Cisco Systems, Inc.
#------------------------------------------------------------------------------
# Default parameter values have a facility name of "*" and
# will be used if no match is found on a specific facility name
#------------------------------------------------------------------------------
# Specific Facility names are as follows:
#
# logger
# foverd
# MML
# procM
# cdrDmpr
# cfgM
# engine
# ioChanMgr - I/O Channel Managers
# pom
# measM
# OPERSAGT
# PROVSAGT
# mmSAgt
# almM
# replicator- Replicator
# mmdb
# amDmpr
# ioChanCtl - controls all channel controllers
# SIP
#
#----Special Paremeter Section----
# callver
# diskmonitor - disk monitor shell script
# XE
#
#------------------------------------------------------------------------------
#---------------- MGC Environment Configuration Tool Usage --------------------
#
#
*.platformId =
*.transpathId =
*.ownTranspathId =
*.peerTranspathId =
*.MGC_CDR_NODE_ID =
*.desiredPlatformState =
*.virtualFaultTolerant =
*.SysConnectDataAccess =
*.GWClearChannelAlgorithm =
*.SipToIsupInterworkingInd =
*.AlarmOnActive = false
*.ipAddrLocalA =
*.IP_Addr1
*.ipAddrLocalB =
*.ipAddrPeerA =
*.ipAddrPeerB =
*.IP_Addr1 =
motherboard
*.IP_Addr2 =
OL-18083-14
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1)
Thus application overrides of the default parameter values
- Log Server
- Failover Daemon
- MML
- Process Manager
- CDR Dumper
- Configuration Manager
- call processing engine
- Provisioning Object Manager
- Measurement Manager
- Operational SNMP Agent
- Provisioning SNMP Agent
- Measurement Manager SNMP Agent
- Alarm Manager
- TimesTen Main Memory Data Base Process
- Alarm / Measurement Dumper
- SIP IOCC's global configureation
- call verification utility
- Execution Environment
REQUIRED STARTUP PARAMETERS
DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX
01
# Transpath Id for ASN
true
10.0.49.43
#
10.0.49.43
#
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
1
01
02
MGC-CDR-NODE-STRING
standalone
false
# avoid prov-dply/sync on FT mode in egw
# true, establish conn. to Data Access Subsystem
null
# clear channel algorithm
0
# 0= No Interworking Encountered
# 1= Interworking Encountered
# true, raise an alarm when pgw is active
0.0.0.0
0.0.0.0
0.0.0.0
# Failover peer's address
0.0.0.0
0.0.0.0
0.0.0.0
# System Id for CDR
# Should be same as
# Address of interface on
D-17
Advertisement
Table of Contents
