1. Manuals
  2. Brands
  3. M&W Manuals
  4. Farm Equipment
  5. SLR5
  6. Operator's manual

M&W SLR5 Operator's Manual

Straight line ripper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Published 02-02
OPERATOR'S MANUAL
This Operator's Manual is an integral part of the safe operation
of this machine and must be maintained with the unit at all times.
READ, UNDERSTAND, and FOLLOW the Safety and Operation
Instructions contained in this manual before operating the
equipment.
M&W
1020 South Sangamon Ave.
Gibson City, Illinois 60936
217-784-4261
SLR5 & SLR7
© 2004 Alamo Group Inc.
STRAIGHT LINE RIPPER
Part No. 4935C
$0.00

Advertisement

Table of Contents
loading

Related Manuals for M&W SLR5

Summary of Contents for M&W SLR5

  • Page 1 SLR5 & SLR7 STRAIGHT LINE RIPPER Published 02-02 Part No. 4935C OPERATOR'S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY SECTION ............................1-1 Safety Information ............................1-2 Decal Location ..............................1-9 Safety Decals ............................... 1-10 Federal Laws & Regulations .......................... 1-13 INTRODUCTION SECTION ..........................2-1 Attention Owner/Operator ..........................2-2 ASSEMBLY SECTION ............................ 3-1 Tractor Preparation ............................3-2 SLR Plow Operation ............................

  • Page 5: Safety Section

    SAFETY SECTION Safety Section 1-1...
  • Page 6 Equipment with this Signal Word are Black and Yellow. Serious injury or possible death! Decals are Black and Orange. WARNING! Imminent death/critical injury. Decals are Red and White. DANGER! (SG-1) SLR5&7 02/02 Safety Section 1-2 © 2004 Alamo Group Inc.
  • Page 7 Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9) SLR5&7 02/02 Safety Section 1-3 © 2004 Alamo Group Inc.
  • Page 8 If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure. (SG-15) SLR5&7 02/02 Safety Section 1-4 © 2004 Alamo Group Inc.
  • Page 9 When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. (SG-19) SLR5&7 02/02 Safety Section 1-5 © 2004 Alamo Group Inc.
  • Page 10 Serious injury or death to the operator or others could result if the operator is under the influnce of drugs or alcohol. (SG-27) SLR5&7 02/02 Safety Section 1-6 © 2004 Alamo Group Inc.
  • Page 11 Never remove any compressed spring retaining bolts or nuts without first relaxing all spring tension. (S3PT-13) SLR5&7 02/02 Safety Section 1-7 © 2004 Alamo Group Inc.
  • Page 12 (Some shipping and handling charges may apply). Contact your M&W dealer to order replacement decals. SLR5&7 02/02 Safety Section 1-8 © 2004 Alamo Group Inc.
  • Page 13 INSTRUCT Made in USA 2458312 INSTRUCT Maintenance 2458316 INSTRUCT Lubrication Chart 2438345 LOGO M&W Name 2458310 NAME Model SLR5 2458311 NAME Model SLR7 2410434 Kit, Safety Decal 2410435 Kit, SLR5 2410436 Kit, SLR7 Serial Number Plate 00776031 --------------- Canister, Operators Manual...
  • Page 14 (1) - Part 00725746 (3) - Part 999200 (10) - Part 2438345 (11) - Part 00763977 (8) - Part 1458392 (9) - Part 1458393 (4) - Part 02962765 (10) - Part 1458398 SLR5&7 02/02 Safety Section 1-10 © 2004 Alamo Group Inc.
  • Page 15 (5) - Part 2458315 (3) - Part 02962764 (12) - Part 1458380 (2) - Part 00771039 SLR7 SLR5 (17) - Part 2458311 (16) - Part 2458310 (17) - Part 999001 SLR5&7 02/02 Safety Section 1-11 © 2004 Alamo Group Inc.
  • Page 16 SAFETY (13) - Part 2458312 (15) - Part 2458316 (28) - Part 2458312 (29) - Part 52740 (30) - Part 2458312 SLR5&7 02/02 Safety Section 1-12 © 2004 Alamo Group Inc.

  • Page 17: Federal Laws & Regulations

    Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) SLR5&7 02/02 Safety Section 1-13 © 2004 Alamo Group Inc.

  • Page 19: Introduction Section

    INTRODUCTION SECTION Introduction Section 2-1...

  • Page 20: Attention Owner/Operator

    3. Record the SLR Model and Serial Number on the Warranty card at the front of the Operator’s Manual. Keep this as part of the permanent maintenance file for the SLR. SLR5&7 02/02 Introduction Section 2-2 © 2004 Alamo Group Inc.

  • Page 21: Assembly Section

    ASSEMBLY SECTION Assembly Section 3-1...

  • Page 22: Tractor Preparation

    Install Shear Bolt Trip Shank Assemblies on SLR Frame using four 3/4" x 6-1/2" bolts, lockwashers and nuts. Install Auto Reset Shank assemblies on SLR Frame using four 3/4" x 2-3/4" bolts, four lockwashers and nuts. Assembly Section 3-2 SLR5&7 02/02 © 2004 Alamo Group Inc.
  • Page 23 3/8” x 3-1/4” bolt and locknut. Install bolt so the threaded end is pointing toward mount to material build up on protruding bolt. See Illustration 3. 3. Install the mounted tire assembly. 4. Repeat steps 1-3 on the other side of the unit. Assembly Section 3-3 SLR5&7 02/02 © 2004 Alamo Group Inc.

  • Page 24: Gauge Wheel Adjustment

    1. The coulters attach to the front face of the front frame tube. The coulter blade should align with the center of each shank. NOTE: The center coulter mount differs from the other mounts as shown. Illustration 5 Center Coulter Mount Assy. Assembly Section 3-4 SLR5&7 02/02 © 2004 Alamo Group Inc.
  • Page 25 Once the coulter height is set, torque coulter rod retaining U-bolts. The correct setting of the coulter should minimize surface disturbance and maintain maximum residue coverage. NOTE: Jack Stand Mounts should be assembled on Outer Two Coulter Units. Illustration 6 Assembly Section 3-5 SLR5&7 02/02 © 2004 Alamo Group Inc.

  • Page 26: Light Kit Installation

    5. Install the plug holder (#13) on the SMV mount bracket using #10 x 1/2" screw and nuts. (Illustration 8). 6. Install the SMV into the mount bracket. GROUND WIRE Illustration 8 Illustration 7 Illustration 9 Assembly Section 3-6 SLR5&7 02/02 © 2004 Alamo Group Inc.

  • Page 27: Operation Section

    OPERATION SECTION Operation Section 4-1...

  • Page 28: Coupling Implement To Tractor

    If equipped with automatic reset shanks, and a rock or obstruction is contacted the shanks will automatically trip up and over the obstruction and automatically go back into the ground by themselves without stopping. See Operation Tips for further instructions. Operation Section 4-2 SLR5&7 02/02 © 2004 Alamo Group Inc.

  • Page 29: Maintenance Section

    MAINTENANCE SECTION Maintenance Section 5-1...

  • Page 30: General Maintenance

    LUBRICATION LOCATION GUIDE * Lubricate at all locations indicated every 8 hours with a clean, Lithium-Based No. 2 Grease. Wipe off fittings and end of grease gun before attaching grease gun. SLR5&7 02/02 Maintenance Section 5-2 © 2004 Alamo Group Inc.
  • Page 31 NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads. SLR5&7 02/02 Maintenance Section 5-3 © 2004 Alamo Group Inc.

  • Page 32: Specifications

    25 - 40 HP/Shank Operating Speed 4.65 MPH 4.65 MPH Coulter Size 22" 22" Tires (2) 20.5 - 8Ply (2) 20.5 - 8Ply Overall Length 65" 65" Overall Width 13' 7" 16' 2" SLR5&7 02/02 Maintenance Section 5-4 © 2004 Alamo Group Inc.
  • Page 34 M&W LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01.M&W warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or workmanship. 1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship.
  • Page 35 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER:...
  • Page 36 SLR5 & SLR7 STRAIGHT LINE RIPPER SOM 2/02 Published 02/02 Part No. 4935C...
  • Page 38 BEFORE MAILING WARRANTY CARD, MAKE SURE ALL INFORMATION IS LEGIBLE ® M&W WARRANTY REGISTRATION INFORMATION MONTH YEAR Serial No. Purchase Date M&W Model Purchaser First Name M.I. Last Name Street & No., RFD, Box, &/or Apt. No. State or City Province Dealer State or...
  • Page 40 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW COPY FOR DEALERS RECORDS. 4. MAIL LAST CARD POSTAGE FREE. ® M&W WARRANTY REGISTRATION INFORMATION MONTH YEAR Serial No. Purchase Date M&W Model Purchaser First Name M.I. Last Name Street &...
  • Page 42 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW COPY FOR DEALERS RECORDS. 4. MAIL LAST CARD POSTAGE FREE. ® M&W WARRANTY REGISTRATION INFORMATION MONTH YEAR Serial No. Purchase Date M&W Model Purchaser First Name M.I. Last Name Street &...

This manual is also suitable for:

Slr7

Table of Contents