1
Adhesive tape
2
3
*The number of brackets varies based on your cooktop model.
18
FLUSH INSTALLATION
Router the countertop to the
specified depth of 3/16" (5mm).
Attach an adhesive tape
along the edges of the
routered recess.
Gently lower the cooktop into
the cutout ensuring you have
access below the countertop
to fit and secure the brackets.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height is
determined by the thickness of
your countertop.
4
5
6
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
Mask off the area to be siliconed
ensuring both the cooktop and
countertop are protected.
Apply silicone in the gap between
countertop and cooktop.
Wipe off any excess silicone.