1
2
3
PROUD INSTALLATION
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the ceramic overhang, 3/16"
(5mm) in from the edge of the
glass. Ensure the adhesive side is
facing down to form a continuous
seal around the cooktop.
Trim any excess seal using a
sharp knife taking care not to
damage the cooktop or surface.
4
5
6
*The number of brackets varies based on your cooktop model
Gently lower the cooktop into
the cutout. Press gently on the
edges of the glass to ensure the
sealing material adheres to the
counter top.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height is
determined by the thickness of
your countertop.
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
17