Table of Contents

Advertisement

Available languages

Available languages

ENG

Installation

Installation height of the cooker hood with edge extraction above the cooker
Utmost efficiency is achieved when the distance between the cooker and the RA cooker hood with
edge extraction is 90cm-120cm. Loss of efficiency and vaporization of grease and odours is possible
at lager distances.
POSITIONS
Indicative information for RA cooker hood operating positions and use:
Pos. 1: For cooking liquid activities: cooking vegetables, soup, pasta, etc.
Pos. 2: For combination of cooking liquid and 1 frying activity
Pos. 3: For full cooking pits: mix of cooking liquid and frying
Pos. 4: Boost position: only for strong-smelling activities such as deep-frying or grilling fish
ASSEMBLY INSTRUCTIONS
Montage fiche TA 940m³/h EC
1.
Make the correctly-sized cut-
Montage fiche TA 940m³/h EC
Montage fiche TA 940m³/h EC
out in the bottom of the cabinet
+ connect the cable to the
230 V power supply.
Remember to connect the
outlet duct.
2.
Integrate the extractor hood
into the cabinet and adjust the
fixing brackets to the correct
distance.
3.
Tighten the screws on the fixing
brackets (left and right)
50
Montage fiche TA 940m³/h EC
4.
At the front, screw the front
slat of the extractor hood to
the floor of the cabinet.
5.
Close the extractor hood and
check whether it is working
properly.
ENG
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta 80Ta 90Ta 100Ta 110Ta 120

Table of Contents