To List Routes; To Create A New Route; To Modify Routes - Humminbird NS25 Operation Manual

5. Highlight the waypoint you wish to end with, then select End to establish it as the last point in
the route.
6. The Route Confirmation screen displays. Select Yes to confirm, select Redo to enter
information again.
Note: When you exit this option, the NS25 provides navigation information fom your present
position to the "Start" waypoint, then it will sequence through waypoints as each is reached.

To list routes:

1. Highlight List, then select Yes to display the List Existing Routes screen with route list.
2. Scroll through the route list to highlight a route and view route information.
3. Press Show to view the route on a map.

To create a new route:

1. Highlight Create, then select Yes to display the Create New Route screen with the waypoint
list.
2. Scroll through the waypoint list to select first waypoint in route, select Add #1 to determine
this as the first waypoint. Continue adding waypoints in sequence until you reach the last one
for your route. For the last waypoint, select End (this displays t he Enter Name screen).
3. Scroll through letter fields to enter name, then select OK to display the Save This Route
screen. (Select Skip if you do not wish to name the route).
4. Select Redo to recreate the route or Yes to save it.
Note: The NS25 assigns a system number to a new route. This number is not always in the
sequence in which it was created.

To modify routes:

1. Highlight Change then select Yes to display the Change Route screen with the route list.
2. Scroll down to select a route.
3. Select Change to edit the route waypoint information.
Note: If the selected route is temporary, it becomes permanent when selecting Change. Any
temporary waypoints in the route also become permanent.
4. Selecting Change displays the route sequence list. From this menu you may add a waypoint
before another one, or remove an existing waypoint.