Ending A Route - Humminbird NS25 Operation Manual

Note: If you have not identified a destination, pressing GOTO gives you options to Enter Numeric
Coordinates, Use the Cursor, Select a Waypoint from the Waypoint List, or go to the Last P-Stor
Position. After selecting the waypoint, the "GO TO" options to modify route menu displays for
chanding the route.
Choose the option from the menu which changes the route as you need. Refer to the figures
below for exact examples of how the route is modified for each selection.

Ending a Route

A birdnote displays to alert you once you have reached the last waypoint in the route.
To end a route, press CLEAR once the final waypoint has been reached. Select YES from the
Clear Route menu to end the current route.