Panasonic PV-DV101 Manual page 229

Running the PHOTOVU
LINK/Movie Messenger
You can transfer Motion images and Still
images from your Palmcorder tape to a PC.
How to insert the USB Cable or
DV Interface Cable (i.LINK)
A
Set Palmcorder POWER to VCR.
B
Connect the Palmcorder to your PC
using the USB Cable (supplied) or
DV interface Cable (i.LINK).
C
Start up the PHOTOVU LINK/Movie
Messenger.
While PHOTOVU LINK/Movie Messenger is running,
do not perform the following operations...
The PC system may become unstable.
• Change the screen area or color pallet in the Display Properties window.
• Turn the Palmcorder power switch ON or OFF while connecting the Palmcorder to your
PC using the USB Cable or DV Interface Cable (i.LINK).
• Change the Palmcorder mode (VCR/CAMERA).
*Close the application before changing the Palmcorder power switch.
• Connect/disconnect the DV Interface Cable (i.LINK).
• Connect/disconnect the USB Cable.
Transferring Your Images
Transferring Your Images
Before you begin
• Insert a recorded tape. (See page 9.)
1
2
3
"Panasonic," "Palmcorder," then
"Movie Messenger."
4
Note
Refer to Help for information about
application operations and Error
messages.
How to remove the USB Cable
or DV Interface Cable (i.LINK)
A
B
C
Set Palmcorder POWER to VCR.
Connect the Palmcorder to your PC
using the USB Cable (supplied) or
DV interface Cable (i.LINK).
(See pages 54, 62.)
Click on "Start," "Programs,"
"PHOTOVU LINK/Movie Messenger"
is opened.
Close the PHOTOVU LINK/Movie
Messenger.
Remove the USB Cable or DV
Interface Cable (i.LINK) from the
Palmcorder.
Set Palmcorder POWER to OFF.
57