Remote Control - Panasonic PV-DV101 Manual

Remote Control (Optional)
Remote Control (Optional)
Remote Controlling Two
Palmcorders
You can control any two Panasonic
Palmcorders with one Remote control. In
order for the remote to distinguish between
the two units, it is necessary to set one of
the Palmcorders to VCR 2. On the remote,
press VCR 1 or VCR 2 to control the
desired Palmcorder.
DISPLAY
ON TV
COUNTER/
TC
/ REW
SLOW/
F.ADV
For VCR 2 :
INDEX
SEARCH
Press these
buttons at the
same time.
Note
• When the Palmcorder and remote are
not set to the same mode (VCR1 or
VCR2), "CHECK REMOTE MODE
(REMOTE)" will appear.
Replace the Battery
A
+
26
CAMERA
REC/
DATE/ PHOTO PAUSE
TIME SHOT
RESET ZOOM
T
REC A.DUB
PLAY
FF/
W
PAUSE/ SLOW/
SEL F.ADV For VCR 1 :
STOP/ INDEX
SET SEARCH
Press these
buttons at the
MENU
same time.
1
While pressing the tab in the direction of the arrow (A) with
your fingernail, pull out the Battery Tray (B).
B
2
Insert the battery into the Battery Tray with the
facing down.
Do not reverse the polarity.
3
Insert the Battery Tray.
Replace battery with Panasonic PART NO. VSBW0004 (CR2025)
only. Use of another battery may present a risk of fire or explosion.
Caution: battery may explode if mistreated. Dispose of used battery
properly. Keep away from children. Do not recharge, disassemble or
dispose of in fire.
1
Set the POWER to VCR or CAMERA.
• The POWER Lamp lights red.
• Be sure POWER is fully turned to
VCR or CAMERA position.
2
Press MENU to display the VCR or
CAMERA mode menu screen.
3
Rotate JOG KEY to select
SET-UP in the CAMERA mode menu
screen or VCR PLAY MODE
VCR mode menu screen, then press
JOG KEY to display the CAMERA
SET-UP or VCR PLAY MODE menu
screen.
4
Rotate JOG KEY to select
and then press JOG KEY to select
VCR 2. (See pages 16, 17). Leave the
other Palmcorder set to VCR1.
5
Set the Remote Control to VCR 1 or
VCR 2 to correspond with the
Palmcorder you wish to control. (See
above left.)
• After replacing the Remote Control
Battery, the remote will default to VCR 1.
CAMERA
in the
REMOTE ,
+
mark