Panasonic PV-DV101 Manual page 196

Camera Recording
Camera Recording
Recording Check
To playback the final few seconds of the
last recorded scene in the REC/PAUSE
mode.
1
EDIT SEARCH
Edit Search
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
1
POWER Switch
2, 3
REC/
PAUSE Button
2
2
EDIT
SEARCH
24
EDIT SEARCH
1
Press EDIT SEARCH
REC/PAUSE mode.
The [CHK] indication appears.
After checking, the Palmcorder returns
to the REC/PAUSE mode.
• For Recording Check, the Palmcorder
must be in the same mode (SP or LP) as
was used for recording, otherwise the
playback picture is distorted.
1
Set POWER to CAMERA.
• The POWER Lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2
In REC/PAUSE mode, hold down
EDIT SEARCH
forward visual search or EDIT
SEARCH to perform a reverse
visual search. Releasing the button
stops the search.
3
Press REC/PAUSE to continue
recording.
Note
• During Edit Search, the picture will
become mosaic in both
search, the sound will be muted in
reverse visual search.
• Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
briefly in the
CHK
to perform a
and