Table of Contents
Advertisement
Redback® A 4500C Evacuation Timer with Network Access
1.4 FRONT PANEL GUIDE
Figure 1.4 shows the layout of the A 4500C front panel.
1
2
Alert
Evac
Hold for 2 seconds
Hold for 2 seconds
1
Alert Tone Activation Switch
This switch is used to activate the Alert tone. It may need to be pressed for up to 2 seconds to activate.
2
Evac Tone Activation Switch
This switch is used to activate the Evacuation tone. It may need to be pressed for up to 2 seconds to activate.
3
Bell Tone Activation Switch
This switch is used to activate the Bell tone. The LED also indicates when the Bell is active.
4
Cancel Tone Activation Switch
This switch is used to cancel the Alert, Evac or bell tone. It may need to be pressed for up to 2 seconds to activate.
5
Status LEDS
Prebell LED - This LED indicates when the Prebell is active.
Music LED - This LED indicates when an audio file from the Music Folder is active.
Other LED - This LED indicates when an audio file from one of the Music Folders 5 - 99 is active.
6
Menu and Navigation Switches
These switches are used to navigate the menu functions of the unit.
7
Isolate Switch
This switch is used to isolate the timing functions of the unit. Note: When this is enabled the Alert, Evac and
Chime buttons and remote triggers will still function.
8
LCD Display
This displays the current time and other timing functions.
9
Micro SD Card
This is used to store the audio files for playback of the timing events and the PC programming software.
10
Fault Indicator
This LED indicates that the unit has a fault.
11
On Indicator
This LED indicates the unit is ON.
12
Standby Switch
When the unit is in standby mode this switch will illuminate. Press this button to switch the unit ON. Once the
unit is ON the On indicator will illuminate. Press this switch again to put the unit back in standby mode.
www.redbackaudio.com.au
3
4
5
Bell
Cancel
Prebell
Music
Other
Hold for 2 seconds
Menu
Fig 1.4
6
7
8
Enter
Isolate
Redback® Proudly Made In Australia
9 10 11
12
A 4500C
A 4500
24 Hour 7 Day Timer
24 Hour 7 Day Timer
Power/
Micro SD Card
Fault
On
Standby
5
Advertisement
Table of Contents
