IHP H5872 Installation Instructions

iNSTaLLaTiON iNSTRUcTiONS FOR iNSTaLLiNG a FiReBOX LiNeR KiT
FOR USe wiTH epic™ GaS STOVeS
KiT cONTeNTS (See Figure 1)
Please ensure that all these parts are in the packaging.
1 ea. Rear Brick Panel (A),
1 ea. Left Brick Panel (B),
1 ea. Right Brick Panel (C),
2 ea. Retaining Brackets (D) - In Flue Restrictor Bag
1 ea. Instruction Sheet
caUTiON: The brick panels are required for your appliance to
function correctly and safely.
f i r e - p a r t s . c o m
TOOLS NeeDeD
5/32" Allen Wrench
GeNeRaL iNFORMaTiON
all of these parts may scratch and bend, great care should be used
in handling them.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
aLL waRNiNGS aND pRecaUTiONS iN THe iNSTaLLaTiON aND
OpeRaTiON MaNUaL pROViDeD wiTH THe appLiaNce appLY TO
THeSe iNSTRUcTiONS.
TURN OFF THe FiRepLace aND aLLOw iT TO cOMpLeTeLY cOOL
BeFORe pROceeDiNG.
D
B
Figure 1 - Kit Contents
a
NOTe: DiaGRaMS aND iLLUSTRaTiONS aRe NOT TO ScaLe
775264M
Rev. a, 11/2013
iNSTaLLaTiON iNSTRUcTiONS
Step 1. Remove the brick panels from the box and carefully unwrap them.
The panels are fragile, so handle them with care. Remove the
bag containing the brick retaining brackets (D) and flue restrictors
from the firebox.
Step 2. Install the rear brick panel (A) bottom first and stand it flush
against the rear of the firebox ensuring the pilot cutout is at the
bottom directly above the pilot. See Figure 2.
Figure 2
Step 3. Install the left panel (B in Figure 3) bottom first and stand flush
against left wall of firebox. Repeat for right panel (C) against the
right wall of firebox.
c
Figure 3
HEARTH PRODUCTS
KITS AND ACCESSORIES
epic™ FiReBOX LiNeR KiT
a
B
caT. NO. H5872