Advertisement
8. Power up
a. Expansion enclosure
If installing PowerStore with an expansion enclosure, the order in which you power up the enclosures may differ. See
Installation and Service Guide for PowerStore 500T
3000, 3200,5000, 5200, 7000, 9000, and 9200
b. Base enclosure
Plug each power cable into the base enclosure power supply unit
power cable. Connect the other end of each power cable to PDU A and PDU B. After you connect the power cables,
the base enclosure automatically starts up.
9. Attach the bezel
1.
Align the bezel with the expansion enclosure.
2.
Gently push the bezel into place on the cabinet until it latches.
3.
Lock the bezel with the provided key.
a. Base enclosure
b. Expansion enclosure
If installing PowerStore with an expansion enclosure, see the
Installation and Service Guide for PowerStore 1000, 1200, 3000, 3200,5000, 5200, 7000, 9000, and 9200
the
https://dell.com/powerstoredocs
Dell EMC PowerStore Quick Start Guide
Installation and Service Guide for PowerStore 1000, 1200,
or the
at
https://dell.com/powerstoredocs
2
for instructions.
for power up details.
and
close the retention bail over the base of the
1
Installation and Service Guide for PowerStore 500T
or
at
Page 6 of 8
Advertisement
