Advertisement
3. Install the base enclosure onto the rails
The base enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal injury
and/or damage to the equipment, do not attempt to lift and install the base enclosure into a rack without a mechanical
lift and/or help from another person.
1.
From the front of the rack, slide the base enclosure onto the rails.
Ensure that the base enclosure is flush with the front of the rack, fully seated in the cabinet, and does not easily slide out
2.
(Optional) If securing the system for shipment in the cabinet or for other unstable environments:
Locate the captive screw under each latch and tighten to the front of the cabinet using a #1 Phillips screwdriver.
Dell EMC PowerStore Quick Start Guide
.
Page 3 of 8
Advertisement
