Fisher & Paykel OR90L7 Installation Manual/User Manual page 5

Safety and warnings
3
Some appliances have a protective film. Remove
this film before using the cooker.
After unpacking the appliance, check to to
ensure it is not damaged and the door closes
correctly. If in doubt, do not use it and consult
your Fisher & Paykel dealer or a professionally
qualified technician.
Electrical
This cooker is to be installed and connected
to the electricity supply only by an authorised
person.
If the installation requires alterations to the
domestic electrical system call a qualified
electrician. He should also check that the
electrical system is suitable for the electricity
drawn by the cooker.
The appliance must be connected to the mains,
checking that the voltage corresponds to the
value given in the rating plate and that the
electrical cable sections can withstand the load
specified on the plate.
A suitable disconnection switch must be
incorporated in the permanent wiring, mounted
and positioned to comply with the local wiring
rules and regulations. The switch must be of an
approved type installed in the fixed wiring and
provide a 3 mm air gap contact separation in all
poles in accordance with the local wiring rules.