Insert A Scene; Delete A Scene; Copy A Scene - Flash F9000382 User Manual

User Manual • Instrukcja Obsługi
individual scenes and program banks will
be preserved.
Action:
1) Turn OFF controller.
2) Press and hold the BANK DOWN button
and the AUTO DEL button while turning
ON the controller.
3) All LEDs will blink.
Scene Programming (Steps)

INSERT A SCENE

Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Press the desired CHASE button.
3) Press the TAP DISPLAY to switch the LCD
display to steps view.
4) Use the BANK UP/DOWN buttons to
navigate steps and locate the insert point of
the new scene.
fle display will read the step number.
5) Press MIDI/REC button to prepare the
insert.
6) Use the BANK UP/DOWN button to
locate the SCENE.
7) Press the SCENE button that corresponds
to the scene to be inserted.
8) Press MIDI/REC button to insert the
scene. All LEDs will blink.
Notes:
1.e. To insert a scene between Steps 05 and
06 navigate using BANK buttons until the
display reads STEP05.

COPY A SCENE

Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Select the BANK that contains the scene
to be copied using the BANK UP/DOWN
buttons.
3) Press the SCENE button that corresponds
to the scene to be copied.
4) Press MIDI/REG button to copy the
scene.
5) Select the destination BANK that contains
the scene memory to record onto using the
BANK UP/DOWN buttons.
6) Press the desired SCENE button to
complete copy. All LEDs will blink.

DELETE A SCENE

Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Select the BANK that contains the scene
to be deleted by using the BANK UP/DOWN
buttons.
3) Press and hold the AUTO DEL button.
4) Press the SCENE button that corresponds
to the scene you want to delete. All LEDs
will blink.
Notes:
When deleting a scene the physical location
is not removed, however, all 192 OMX
channels available to the scene will be set to
value 0.
DELETE ALL SCENES
Action:
1) Press and hold the PROGR AM button
and the BANK DOWN button while turning
off power to the controller.
2) Turn the controller back on.
Notes:
CAUTION!
flis process is irreversible. All scenes with
data will be set to 0.