Edit Chase (Insert Scene Into Achase) - Flash F9000382 User Manual

3) Press the TAP DISPLAY button to switch
the LCD display to steps.
4) Review each scene/step individually by
using the BANK UP/DOWN buttons.
EDIT CHASE
(COPY BANK INTO CHASE)
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Press the desired CHASE button.
3) Select the BANK to be copied using the
BANK UP/DOWN buttons.
4) Press MUSIC/BANK COPY button to
prepare copy.
5) Press MIDI/REC button to copy the
bank. All LEDs will blink.
EDIT CHASE (COPY SCENE INTO CHASE)
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Press the desired CHASE button.
3) Select the BANK that contains the scene
to be copied using the BANK UP/DOWN
buttons.
4) Press the SCENE button that corresponds
to the scene to be copied.
5) Press MIDI/REG button to copy the
scene. All LEDs will blink.
EDIT CHASE (INSERT SCENE INTO A
CHASE)
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2) Press the desired CHASE button.
3) Press the TAP DISPLAY to switch the LCD
display to steps view.
4) Use the BANK UP/DOWN buttons to
240A DMX CONTROLLER 240ch 2019 • Art No F9000382
navigate steps and locate the insert point of
the new scene.
fle display will read the step number.
5) Press MIDI/REC button to prepare the
insert.
6) Use the BANK UP/DOWN button to
locate the SCENE.
7) Press the SCENE button that corresponds
to the scene to be inserted.
8) Press MIDI/REC button to insert the
scene. All LEDs will blink.
Notes:
I.e. To insert a scene between Steps 05 and
06 navigate using BANK buttons until the
display reads STEP05.
DELETE A SCENE IN A CHASE
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2. Press the desired CHASE button that
contains the scene to be deleted.
3) Press the TAP DISPLAY button to switch
the LCD display to steps.
4) Select the scene/step to be deleted using
the BANK UP/DOWN buttons.
5) Press AUTO DEL button to delete the
step/scene. All LEDs will blink.
DELETE A CHASE
Action:
1) Press and hold the PROGRAM button to
enter programming mode.
2. Press the CHASE button (1-6) to be
deleted.
3) Press and hold AUTO DEL button and
the respective CHASE button to delete the
chase. All LEDs will blink.
DELETE ALL CHASE PROGRAMS
CAUTION! flis procedure will result in
irrevocable loss of chase step memory. fle