Scene Editing - Flash F9000384 User Manual

User Manual •Instrukcja Obsługi
9. TAP SYNC/DISPLAY
12
Scanners
1
2
3
4
5
I. Press music/Bank copy, corresponding
indicator lights, scene run is engaged into
MUSIC RUN.
II. Select desired bank, rising UP or DOWN
or via MIDI signals.
III. Press music/bank copy once more to
withdraw MUSIC RUN.
4. MIDI RUN
Select bank to run scenes using MIDI
whenever it is in MANUAL RUN, AUTO
RUN or MUSIC RUN.
3. CHASE RUN
I. CHASE RUN requires making programs,
when running CHASE, scene will be step
auto matching.
II. CHASE RUN includes MANUAL RUN,
AUTO RUN, AUDIO RUNS, and MIDI RUN.
III. Eigher one CHASE, more can be run in
the order of selection.
IV. Press CHASE, Corresponding indicator
light, which indicates it, is in CHASE RUN.
4. FADE TIME CONTROL
Move the slider to adjust FADE. Output
varies accordingly.
MIDI CHANNEL SETTING
1. MIDI channel setting
177-192
Channel
1-16
17-32
33-48
49-64
65-80
I. Press MIDI, the third and fourth digits of
LED blink, select MIDI
II. Press MIDI/ADD to add a programmed
scenes.

2. SCENE EDITING

Add a STEP in CHASE. Select desired LCD
display Presses TAP SYNC/DISPLAY, the
LCD shows the CHASE and its STEP. If it
has made program till the 15th step, select
the 9th using UP or DOWN, press MIDI/
ADD, the CHASE is maintained and the
STEP turns to 10th STEP. Select desired
SCENE using UP or DOWN, Press MIDI/
REC, then the new 10th STEP is added to
SCENE, the previous 10th STEP turns to
the new 11th STEP, the previous 1th STEP
turns to the new 12th STEP, and so on.
Delete a STEP in CHASE
Select desired STEP and then press AUTO/
DEL.
For example, select the 10th STEP using
UP or DOWN, press AUTO/DEL, then 10th
STEP is deleted, the previous 11th STEP
turns to the 10th STEP, the previous 12th
STEP, and so on.
3. DELETE A CHASE.
OFF
Fade control
ON
ON
ON
ON
ON
OFF
LED
ON
ON
ON
ON
ON