Editing A Program; Copy A Program; Checking A Chase - Flash F9000382 User Manual

User Manual • Instrukcja Obsługi
2) Use the BANK UP/DOWN buttons to
select the PROGRAM bank to review.
3) Press the SCENES buttons to review each
scene individually.

EDITING A PROGRAM

scenes will need to be modified manually.
Action:
1) Press and hold the PROGRAM button
until the LED blinks.
2) Use BANK UP/DOWN buttons to change
Program banks if necessary.
3) Select the desired fixture via the
SCANNERS button.
4) Adjust and change fixture attributes
using the channel faders and wheel.
5) Press the MIDI/REC button to prepare
the save.
6) Select the desired SCENES button to
save.
Notes:
Deselect Blackout if LED is lit.

COPY A PROGRAM

Action:
1) Press and hold the PROGRAM button
until the LED blinks.
2) Use BANK UP/DOWN buttons to select
the PROGRAM bank you will copy.
3) Press the MIDI/REC button to prepare
the copy.
4) Use BANK UP/DOWN buttons to select
the destination PROGRAM bank.
5) Press the MUSIC BANK COPY button to
execute the copy. All LEDs on the controller
will blink.
Notes:
All 8 scenes in a Program bank will be
copied.
Chase Programming
A chase is created by using previously
created scenes. Scenes become steps in a
chase and can be arranged in any order
you choose. It is highly recommended that
prior to programming chases for the first
time; you delete all chases from memory.
See „Delete All Chases" for instructions.
CREATE A CHASE
A Chase can contain 240 scenes as steps.
fle term steps and scenes are used
interchangeably.
Action:
1) Press the PROGRAM button until the
LED blinks.
2) Press the CHASE (1-6) button you wish
to program.
3) Change BANK if necessary to locate a
scene.
4) Select the SCENE to insert.
5) Tap the MIDI/REC button to store.
6) Repeat steps 3-5 to add additional
steps in the chase. Up to 240 steps can be
recorded.
7) Press and hold the PROGRAM button to
save the chase.
RUNNING A CHASE
Action:
1) Press a CHASE button then press the
AUTO DEL button.
2) Adjust the Chase speed by tapping the
TAP DISPLAY button twice at a rate of your
choosing.
Notes:
fle time between 2 taps will set the chase
speed (up to 10 minutes)

CHECKING A CHASE

Action:
1) Press and hold the PROGRAM button
until the LED is lit.
2) Select the desired CHASE button.